500L Waste Engine Oil Disposal Machine
Application 500L/day/batch Waste Engine Oil Disposal Machine is the smallest model of Black Engine Oil Disposal Machine.It uses vacuum distillation technology to separate oil products from impurities. The technology is the most advanced waste oil disposal technology and most economy for small scale oil factories. The mode can recycle almost all kinds of waste lubricating oil. It separates different fractions of oil which contained in the waste oil by proper heating and temperature controllin...
500L/day/batch Waste Engine Oil Disposal Machine is the smallest model of Black Engine Oil Disposal Machine.It uses vacuum distillation technology to separate oil products from impurities. The technology is the most advanced waste oil disposal technology and most economy for small scale oil factories. The mode can recycle almost all kinds of waste lubricating oil. It separates different fractions of oil which contained in the waste oil by proper heating and temperature controlling.
Main oil product of the mode is base oil. Recover ratio up to 85% of waste oil.
Oil products ratio (total 100% waste oil) :
1. 80-85% base/virgin oil (depend on base/virgin oil content in the waste/used oil)
2. 3-5% mixture of gasoline and diesel (can be used as heating fuel)
3. 1-3% water (can be used as cooling water)
4. 6-10% oil sludge. (can be used as heavy fuel)
A. Low chemical consumption, recycle 1 ton waste oil will only costs about 30 US dollars. And the chemical is ordinary chemical that can be found easily.
B. High efficient vacuum system combined with water circulation vacuum and oil vacuum, allows the system to work more efficiently and safely with less power consumption.
C. Environmentally friendly. The whole system works in fully sealed condition, and with exhaust gas disposal system that no harm gas would be emitted from the system to the air. With little chemical consumption and high recycling/recovery rate, the system produces almost no wastes.
D. Safe and easy to operate. The whole system is protected by safety systems. All electric parts are operated automatically.
E. Unique indirect hot air heating system, heat the oil evenly and effectively and sufficiently that it produces more and better quality oil products,especially heavy base oil. Customers can choose natural gas, diesel, electric as its heating energy.
F. Very high quality oil products. The main oil product base oil obtained from waste oil by our machine has no bad smell, color is very stable transparent golden (color code:1-1.5). If it is sealed well, there would be no color change in 6 months.
G. Special distillation kettle cooling system allows users to start the system continuously with fewer waiting time, thus increases production if needed.
H. Can recycle almost all kinds of lubricating oils such as motor oil, engine oil, hydraulic oil, gear oil, turbine oil, refrigerator oil, transformer oil etc. mixed or non-mixed. And other industrial oil.
About The Waste Oil Pollutant Components
Water: Fuel burns to CO2 and H2O.
For every liter of fuel burnt, a liter of water is created.
This normally passes out through the exhaust when the engine is hot, but when cold it can run down and collect in the oil. This leads to sludge formation and rust.
Soot and carbon: These make the oil go black.
They form as the result of incomplete combustion, especially during warm-up with a rich mixture Lead. Tetraethyl lead, which used to be used as an anti-knock agent in petrol, passes into the oil.
A typical used engine oil may have contained up to 2% lead, but today any lead comes from bearing wear and is likely to be in the 2 – 12 ppm range.
Fuel: Unborn gasoline or diesel can pass into the lubricant, again especially during start-up.
Abrasives Road dust: This passes into the engine through the air-cleaner.
Composed of mall particles of silicates. Wear metals. Iron, copper and aluminum released due to normal engine wear.
Chemical products: Oxidation products.
Some of the oil molecules, at elevated temperatures, will oxidize to form complex and corrosive organic acids. Depleted additive remnants
Vacuum Distillation Processing
Around 55℃, gasoline start to release form the waste oil.
Around 90-100C, water released from the waste oil.
around 110℃ – 220℃, diesel released from the batch.
around 220°C-300°C, Light base oil are distilled out
Around 300℃ -350℃., the heavy base oil distills out
L / day
According to customers options