Oil Refinery Plant For Recycling Black Engine Oil into lube Base oil
Application The machine can refine/ regenerate used engine oil, motor oil, rubber oil and almost all lubricant oils to clean high quality lubricating base oil and other oil by-products. This plant is high-automatically user friendly. only 1-2 people are enough to handle the machine below 10 tons/day. Oil products ratio (total 100% waste oil) : 1. 80-85% base/virgin oil (depend on base/virgin oil content in the waste/used oil) 2. 3-5% mixture of gasoline and diesel (can be used as heatin...
The machine can refine/ regenerate used engine oil, motor oil, rubber oil and almost all lubricant oils to clean high quality lubricating base oil and other oil by-products.
This plant is high-automatically user friendly. only 1-2 people are enough to handle the machine below 10 tons/day.
Oil products ratio (total 100% waste oil) :
1. 80-85% base/virgin oil (depend on base/virgin oil content in the waste/used oil)
2. 3-5% mixture of gasoline and diesel (can be used as heating fuel)
3. 1-3% water (can be used as cooling water)
4. 6-10% oil sludge. (can be used as heavy fuel)
A. Low chemical consumption, recycle 1 ton waste oil will only costs about 30 US dollars. And the chemical is ordinary chemical that can be found easily.
B. High efficient vacuum system combined with water circulation vacuum and oil vacuum, allows the system to work more efficiently and safely with less power consumption.
C. Environmentally friendly. The whole system works in fully sealed condition, and with exhaust gas disposal system that no harm gas would be emitted from the system to the air. With little chemical consumption and high recycling/recovery rate, the system produces almost no wastes.
D. Safe and easy to operate. The whole system is protected by safety systems. All electric parts are operated automatically.
E. Unique indirect hot air heating system, heat the oil evenly and effectively and sufficiently that it produces more and better quality oil products,especially heavy base oil. Customers can choose natural gas, diesel, electric as its heating energy.
F. Very high quality oil products. The main oil product base oil obtained from waste oil by our machine has no bad smell, color is very stable transparent golden (color code:1-1.5). If it is sealed well, there would be no color change in 6 months.
G. Special distillation kettle cooling system allows users to start the system continuously with fewer waiting time, thus to increase production when needed.
H. Can recycle almost all kinds of lubricating oils such as motor oil, engine oil, hydraulic oil, gear oil, turbine oil, refrigerator oil, transformer oil etc. mixed or non-mixed. And other industrial oil.
The Distillation Principle:
The machine uses physical separation method (vacuum distillation) to separate oil products (main product base oil) and impurities from waste oil. It relys on the variation of temperature ranges in different oil products contained in the used oil.
About Re-refined oil
Re-refined oil is with good color by using modern technologies of distillation process without adding any activity clay. you could use it for passenger car motor oil, automatic transmission fluid, hydraulic fluid, heavy-duty motor oil.
There’s no difference between oils re-refined and refined oil from virgin lubricating oil.
Base Oil Parameter
Light Oil (Gasoline and Diesel oil)
Lubricating Base oil
Density (20 ℃)
Flash point (open)
Oxidation stability, total insoluble
(50 ℃, 3h)
About The Vacuum Distillation
Comparing to normal atmosphere pressure, Vacuum pressure is negative pressure. The boiling range of liquid oil will be greatly lowered when it is distilled in the distillation kettle under high vacuum. That is to say, oil will be distilled into gas state in a much lowered temperature. This way it protects oil quality as well as saving energy.
Warranty And Our Service
100% brand new, 12 months quality warranty(any of the damage caused by buyer shall not be responsible by seller)quality guaranty.
The warranty time can be extended according to the special design and customers requirements. (please contact with our sales for details)
A. Overseas installation guiding service
B. Machine maintenance and replacement guiding service.
C. Quality warranty is 12 month, we provide lifetime technical assistant.
D. Regular customer discounts and customer introducing discounts(talk with our sales)